Product overview
Materials & retarding two types for coagulation type.
Speed setting product is a hardened piece. Hours of high strength, micro expansion of water rigid materials, mainly used for impermeability plugging.
The retarding products can be used for engineering moistureproof, seepage control.
The product non-toxic, tasteless, no pollution, chemical corrosion resistance.
The construction is simple, and the water how to fry the construction can be welcome back.
Widely used in water pool, roofing, low, tunnel engineering plugging, water, repair and moistureproof, seepage control.
Construction requirements
Used for the waterproof and anti-seepage of retarding plugging Ling engineering base surface must be flat, solid, clean, and must be fully wetted to saturation (but no water). Construction in strict accordance with the instructions in proportion with and stir evenly, then coated in accordance with the requirements of the coating after curing, wetted with water for second times coating.
Accelerating plugging Ling construction should first be leaking point or leaking seam hewn bell mouth, will clean up the debris of mud and sand etc.. In accordance with the requirements of the rapid mixing ratio, the winter warm water to mix, mix the good plugging daub on his hand and felt daub fever and began to harden, quickly meet leaking direction pressure, for a certain time (3 ~ 5) and then let go. The plugging waterproof coating around the site and then again processing application.
Matters needing attention
Construction is completed, the coating is hardened, should be timely moisture conservation, generally 1 to 3 days.
The retarding blockage, leakage spirit construction coating should be slightly back and forth scraping, compacting the concrete, at the same time, attention should be paid to the tower.
Accelerating plugging Ling setting speed, each mixture is not too much, will accompany with the mix.
|
