Method for making cement polymer waterproof coating (JS waterproof coating) is recommended by the Ministry of construction of new green waterproof coating, waterproof coating is composed of two components of organic liquid material and inorganic powder compound and into, it is a kind of organic materials with high elasticity, and new waterproof materials and inorganic materials good durability. After coating can form a waterproof coating high elastic strength, and can be prepared according to the requirement of color coating.
Product features:
1, construction on the base of various material wet or dry.
2, coating tenacity, high strength, water resistance, weatherability, excellent durability.
3, add pigment, forming a color coating.
4, non-toxic, tasteless, non polluting, safe construction simple, short construction period.
5, in elevation, slope and the top surface of the construction does not flow.
6, and the method for making cement mortar base surface agent outer material firmly bond.
7, high temperature can reach 140 ℃.
Use:
A variety of old and new buildings and structures (for example: Housing roofing, underground, external wall, measuring bath and tunnels, bridges, water etc.) can be used in waterproof engineering.
Method of use:
1, the base surface must be smooth, firm, clean, no water, no leakage, uneven department must first leveling, leak stopping treatment must first, yin yang angle should be made into a circular arc angle.
2, according to the provisions of the proportion of materials, such as the need to add water, add in the liquid, adding agitator stirring. Stir evenly until the aggregate does not contain material (stirring time more than 3 minutes, preferably without manual stirring).
Primer coating weight ratio: the liquid material: Powder: water = (Ⅰ) 10:7:10. (II) 10:12:10. lower, middle and upper coating weight proportion: liquid material: Powder: water = (Ⅰ) 10:7:0-1. (II) 10:12:0-2. upper layer coating can add pigment to form a color layer. In accordance with range, slope, the top surface or the facade construction with or without addition, plane construction should add some more.
3, select the appropriate tool (roller, brush or scraper), according to the corresponding method: according to hit bottom, the lower and upper layer to complete the order.
4, protective or decorative layer construction, to be completed in 2 days of waterproof layer. Mortar plastering, in order to facilitate the construction, the waterproof layer and finally again after coating, immediately sprinkle clean sand. Liquid material: powder =10:20-30 tune into putty shape, can also make paste, sealing material.
|
